Daewoo IC Forklifts Tucson

Inspect a Forklift

There are more than 10,000 workplace injuries related to forklifts happen each year, based on HRSDC and OSHA reports. A lot of these mishaps are caused by driver error. Lack of proper equipment inspection and maintenance results in numerous others. Forklift operation and maintenance is not just the cause of personal injuries, but also of property damage. Forklifts can damage building structures, overhead pipes and sprinklers, and other equipment when incorrectly operated. The following day by day inspections must be carried out so as to lessen the likelihood of forklift accidents.



Turn off the engine prior to inspecting various fluid levels: fuel, engine oil, coolant, brake fluid and hydraulic oil. The tires should be inspected for signs of wear and tear. Check the air pressure in the tires. Check the forks' condition. The load backrest should be attached firmly. Do a visual check of the top-clip retaining heel and pin. Next carry out an inspection of the mast chains, hydraulic hoses, stops and cables. Make certain that both the finger and overhead guards are securely attached.



The LP powered forklift has propane tanks that need to be checked for corrosion, damage or rust. The battery's charge and electrolyte levels need to be tested every so often. Seat belts need to be checked for wear and tear. Check to make sure the owner's handbook is kept on-board the forklift in a storage compartment. Check the seat belt to make certain the latches are secure. Check the hood latch to ensure it is functioning as it should.



Start the forklift and listen to the noise of the engine to make sure there are no unusual sounds. If there are, investigate promptly. Check the steering controls and the accelerator. The parking break and the service break must be functioning correctly.



To ensure proper functioning in both forward and reverse, the tilt control and drive control must be checked. The functioning of the lowering control, the hoist and attachment control needs periodic inspection. Test the horn and lights. Then check the heater, defroster and wipers to make certain they are functioning well. Inspect each and every gauge to ascertain that it is reading within functional limits.

• Comedil Cranes Tucson
  Tower Cranes Grow to New Heights Within the tower crane industry, the 1950s showcased many significant milestones in tower crane design and development. There were a range of manufacturers were beginning to produce more bottom... More
• Wolff Construction Cranes Tucson
  Hydraulic truck cranes are different from other crane types because of the way they specifically operate. Hydraulic cranes utilize oil rather than utilizing a winch in order to wind up cables to provide the lifting... More
• Cat High Capacity Forklift Tucson
  Cat Lift Trucks are some of the finest in the industry, providing excellent gasoline, LPG, diesel, or electric counter-balanced lift truck units. Cat offers a wide array of equipment and machines to handle your warehouse... More
• Gradall Aerial Lifts Tucson
  Classifications of Aerial Lift Platforms & Scissor Lifts A scissor lift consists of a series of crisscrossed steel arms that are linked to make an X pattern. When raised vertically, the X pattern of support... More
• Liebherr Self Erect Cranes Tucson
  Liebherr manufactures a wide array of mobile cranes. These units are available with crawler-tracked or wheeled undercarriages. As well, they come outfitted with telescoping booms or lattice booms, and are designed to function in the... More