The kind of vehicle usually found inside warehouses, factories and different work sites where moving heavy materials from one location to another is required is called a forklift. The mast is the mechanism located on the front of the forklift which hydraulically lowers and raises the load. The "cat" is the area which is protected where the driver of the forklift sits.
Forklifts could lift loads which weigh between one to five tons. Several kinds could be utilized to lift shipping containers and loads which are a lot heavier.
The tires of a forklift should be checked and maintained regularly. The types of tires on various forklifts differ according to factors such as frequency of use, load weights and ground surfaces. Every driver of a forklift should have access to replacement tires, a forklift jack and tire press.
Tire Maintenance Instructions
You should frequently check the tires. Watch for signs of damage and wear to the tires. If the wear on the tire exceeds 40%, it has to be replaced.
When you buy tires, be sure you buy the correct type - polyurethane, solid or pneumatic.
When you have to replace the tires, the forklift jack must be positioned under the tire. You could easily change the tires if you lift the forklift high enough.
You could utilize the tire press to pull the tire from the rim and remove the damaged tire. Install the new tire and properly secure it. If you are changing more than one tire and you only have one jack, lower the forklift, then reposition the jack at the next tire.
On-site tire repair can be performed by a repair company. If the tire is extremely large for both mobile and in-house tire presses, the tire which is damaged must be transported to a shop that has a stationary tire press.