Daewoo Propane Forklifts Tucson

Change a Propane Tank

Propane powered forklifts are frequently utilized inside warehouses. The forklift is designed with the propane tank mounted at the back of the driver. The tanks, that look a lot like beer kegs, have to be replaced every so often because they have a limited lifespan. Forklift drivers should utilize caution when handling propane tanks. Compressed gases are really dangerous, specially because the gas is flammable. Use care when removing and replacing propane tank to prevent being injured.



1 If there is a need to change the propane tank, the first step is to stop the forklift, then turn the tank valve off. The lift truck should be left on until the engine dies. This procedure burns the gas off inside the transfer hose which connects the engine and the tank. Prior to taking the second steps, put on the proper safety equipment, such as insulated gloves made of either leather or neoprene. It is important for you to protect your skin from touching the compressed gas, that is extremely cold.

2 The hose of the tank needs to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, tighten the nut to reconnect the holding straps and to reattach the hose at the valve of the tank.

3 Leaks could be checked just by applying soapy water to the valve and slightly opening it. If there is a leak, it will cause bubbles to froth from around the valve. If this happens, inspect the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks around the valve area, and after that do the leak inspection procedure once more. Persistent leaks mean that the nut and connecting hose would have to be replaced. However, if replacing the nut and hose still does not stop the leak, the tank must be replaced.

4 Open the valve all the way to enable the gas to fill the connecting hose. Afterward you could start the forklift and continue operating.

• Caterpillar Container Forklift Tucson
  A container forklift is specially used to load and unload big, heavy freight containers. They are used to transport freight on and off ships, truck beds and trains. Container forklifts are the largest and most... More
• Comansa Cranes Tucson
  Linden Comansa was a company which started making tool and jig in the early 1960s. They went by the name "Imausa". The company began supplying mostly the larger sub-contractors to the then booming automotive business... More
• Clark LP Forklifts Tucson
  How to Fill Forklift Cylinders Liquid propane is usually utilized to power industrial lift trucks or forklifts. There is the option to have cylinders brought to your facility, or to have refueling capabilities on site.... More
• Gradall Aerial Lifts Tucson
  Classifications of Aerial Lift Platforms & Scissor Lifts A scissor lift consists of a series of crisscrossed steel arms that are linked to make an X pattern. When raised vertically, the X pattern of support... More
• Liebherr Self Erect Cranes Tucson
  Liebherr manufactures a wide array of mobile cranes. These units are available with crawler-tracked or wheeled undercarriages. As well, they come outfitted with telescoping booms or lattice booms, and are designed to function in the... More